![](../../../img/00/ACC02853AC00ENG.png)
![](../../../img/00/ACB02965AD00ENG.png)
|
Connect the M.U.T.-III to the
16-pin diagnosis connector as follows.
note |
For details on how to use the
M.U.T.-III, refer to the
"M.U.T.-III Owner’s manual."
|
1.Start up the personal
computer. 2.Connect special tool V.C.I.-Lite USB
cable (MB992747/MB992748) or M.U.T.-III
USB cable (MB991827) to V.C.I.-Lite (MB992744) or V.C.I.
(MB991824) and the personal computer. 3.Connect
V.C.I.-Lite main harness A (MB992745) or M.U.T.-III main
harness A (MB991910)
to the V.C.I.-Lite or V.C.I. 4.Connect the
V.C.I.-Lite main harness A or M.U.T.-III main harness A to
the diagnosis
connector of the vehicle.
note |
When the V.C.I.-Lite is
connected to the diagnosis connector, the
V.C.I.-Lite indicator
lamp will be illuminated in a green
colour.
|
5.Turn the V.C.I. power switch to the "ON"
position. <When using the V.C.I.>
note |
When the V.C.I. is energised,
the V.C.I. indicator lamp will be illuminated in
a green
colour.
|
6.Start the M.U.T.-III system on the personal
computer and turn the ignition switch
to the "ON" position. 7.Select
"KOS/OSS/IMMO/Keyless" in the "System Select"
screen. Select
the model year and push the OK button (Check each model if
there is an option). Select "Special Function"
on the next screen, and select
"ENG Key Code & Chassis No/VIN Reg" on the
further screen.
|
![](../../../img/00/ACC00290AB00ENG.png)
|
8.Push the OK button after
"Key Code Registration" is displayed. 9.Push the
OK button after "Completed. Press OK button and move to
Chassis No./VIN
writing function." is displayed.
|
![](../../../img/00/ACC00285AF00ENG.png)
|
10.Enter the Chassis No./VIN
of registering vehicle and push the OK
button. 11.Push the OK button after
"Chassis No./VIN Writing will start. Are you sure?" is
displayed. 12.Return to the previous screen and
"In Progress" is displayed at the lower-left corner
on the screen. 13.Push the OK button after
"Completed." is displayed.
|
![](../../../img/00/ACE01437AB00ENG.png)
|
14.Chassis No./VIN writing
result is displayed.
|
![](../../../img/00/ACC02853AC00ENG.png)
![](../../../img/00/ACB02965AD00ENG.png)
|
Connect the M.U.T.-III to the
16-pin diagnosis connector as follows.
note |
For details on how to use the
M.U.T.-III, refer to the
"M.U.T.-III Owner’s manual."
|
1.Start up the personal
computer. 2.Connect special tool V.C.I.-Lite USB
cable (MB992747/MB992748) or M.U.T.-III
USB cable (MB991827) to V.C.I.-Lite (MB992744) or V.C.I.
(MB991824) and the personal computer. 3.Connect
V.C.I.-Lite main harness A (MB992745) or M.U.T.-III main
harness A (MB991910)
to the V.C.I.-Lite or V.C.I. 4.Connect the
V.C.I.-Lite main harness A or M.U.T.-III main harness A to
the diagnosis
connector of the vehicle.
note |
When the V.C.I.-Lite is
connected to the diagnosis connector, the
V.C.I.-Lite indicator
lamp will be illuminated in a green
colour.
|
5.Turn the V.C.I. power switch to the "ON"
position. <When using the V.C.I.>
note |
When the V.C.I. is energised,
the V.C.I. indicator lamp will be illuminated in
a green
colour.
|
6.Start the M.U.T.-III system on the personal
computer and turn the ignition switch
to the "ON" position. 7.Select
"KOS/OSS/IMMO/Keyless" in the "System Select"
screen. Select
the model year and push the OK button (Check each model if
there is an option). Select "Coding"
on the next screen.
|
![](../../../img/00/AC509821AG00ENG.png)
|
8.Select
"Chassis No. /VIN Writing" on "Coding"
screen.
|
![](../../../img/00/ACE01425AB00ENG.png)
|
9.Push the OK button after
the Chassis No./VIN written in the engine-ECU is
displayed. 10.Push the OK button after
"Chassis No./VIN Writing will start. Are you sure?" is
displayed. 11.Push the OK button after
"Completed." is displayed.
|
![](../../../img/00/ACE01426AB00ENG.png)
|
12.Result of Chassis No./VIN
writing is displayed. 13.Resister the other ID
code. (Refer to GROUP 42B, Troubleshooting - ID Codes
Registration Procedure.)
|
![](../../../img/00/ACC02853AC00ENG.png)
![](../../../img/00/ACB02965AD00ENG.png)
|
Connect the M.U.T.-III to the
16-pin diagnosis connector as follows.
note |
For details on how to use the
M.U.T.-III, refer to the
"M.U.T.-III Owner’s manual."
|
1.Start up the personal
computer. 2.Connect special tool V.C.I.-Lite USB
cable (MB992747/MB992748) or M.U.T.-III
USB cable (MB991827) to V.C.I.-Lite (MB992744) or V.C.I.
(MB991824) and the personal computer. 3.Connect
V.C.I.-Lite main harness A (MB992745) or M.U.T.-III main
harness A (MB991910)
to the V.C.I.-Lite or V.C.I. 4.Connect the
V.C.I.-Lite main harness A or M.U.T.-III main harness A to
the diagnosis
connector of the vehicle.
note |
When the V.C.I.-Lite is
connected to the diagnosis connector, the
V.C.I.-Lite indicator
lamp will be illuminated in a green
colour.
|
5.Turn the V.C.I. power switch to the "ON"
position. <When using the V.C.I.>
note |
When the V.C.I. is energised,
the V.C.I. indicator lamp will be illuminated in
a green
colour.
|
6.Start the M.U.T.-III system on the personal
computer and turn the ignition switch
to the "ON" position. 7.Select "ETACS" in the
"System Select" screen. Select the model year and push the
OK
button (Check each model if there is an option).Select
"Coding" on the next screen, and select
"Chassis No./VIN Writing" on the further
screen.
|
![](../../../img/00/ACC00281AB00ENG.png)
|
8.Enter the Chassis No./VIN
of registering vehicle and push the OK
button. 9.Push the OK button after
"Chassis No./VIN Writing will start. Are you sure?"
is displayed. 10.Return to the previous screen and
"In Progress" is displayed at the lower-left corner
on the screen. 11.Push the OK button after
"Completed." is displayed.
|
![](../../../img/00/ACC00282AA00ENG.png)
|
12.Chassis No./VIN writing
result is displayed. 13.Select
"Chassis No./VIN Information" on the "Coding" screen
after the Chassis
No./VIN writing is completed, and check that the Chassis
No./VIN is changed. 14.Resister the other ID
code.
|