REMOVAL AND INSTALLATION


Pre-removal Operation
  • Engine Oil Draining (Refer to GROUP 12 - On-vehicle Service, Engine Oil Replacement ).
  • Drive Belt Removal (Refer to ).
  • Starter Assembly Removal (Refer to GROUP 16 - Starting System, Starter Assembly ).
  • Oil Level Gauge Removal (Refer to GROUP 11B - Alternator and Ignition System ).

 Post-installation Operation
  • Oil Level Gauge Installation (Refer to GROUP 11B - Alternator and Ignition System ).
  • Starter Assembly Installation (Refer to GROUP 16 - Starting System, Starter Assembly ).
  • Drive Belt Installation (Refer to ).
  • Engine Oil Refilling (Refer to GROUP 12 - On-vehicle Service, Engine Oil Replacement ).




Removal steps
<<A>>
·
 A/C compressor and clutch assembly, A/C compressor bracket (Refer to GROUP 55A - Compressor Assembly ) <Vehicles with A/C and cooler>.


1.
 Transmission stay


2.
 Bell housing cover


3.
 Oil drain plug


4.
 Oil drain plug gasket
<<B>>
 >>A<<
 5.
 Oil pan


6.
 Oil strainer


7.
 Oil strainer gasket


·
 Stiffener plate (Refer to GROUP 11B - Crankshaft and Cylinder Block ).

REMOVAL SERVICE POINTS

<<A>> A/C COMPRESSOR AND CLUTCH ASSEMBLY/A/C COMPRESSOR BRACKET REMOVAL
1.Remove the A/C compressor and clutch assembly together with the hose from the bracket.
2.Tie the removed A/C compressor and clutch assembly with a string at a position where they will not interfere with the removal and installation of oil pan.
3.Remove the A/C compressor bracket.

<<B>> OIL PAN REMOVAL
1.Remove the oil pan mounting bolts.

2.Use special tool oil pan FIPG cutter (MD998727) to remove the oil pan.

INSTALLATION SERVICE POINT

>>A<< OIL PAN INSTALLATION
For the installation procedure, refer to GROUP 11B - Oil Pan and Timing Chain Case .