|
1.Temporarily install the
timing chain case assembly, engine mounting insulator and
oil pan which was removed at the timing chain case
removal.
|
|
2.Remove special tool engine
hanger (MB991928 or MB991895) for holding the engine
assembly, which have been attached when the timing chain
case was removed.
|
|
3.Remove the brake booster
vacuum pipe (LHD: Refer to GROUP 35A - Master Cylinder
Assembly and Brake Booster Assembly , RHD: Refer
to GROUP 35A - Master Cylinder Assembly and Brake
Booster Assembly ).
|
|
4.Remove the engine hanger
(Refer to GROUP 11B - Fuel and Emission Parts ).
|
|
5.Loosen the cylinder head
bolts in two or three steps.
|
|
6.
caution |
When supporting the engine
assembly with a garage jack, be careful not to
deform the oil pan.
|
Place a garage jack against the oil pan with a piece
of wood in between to support the engine assembly.
|
|
7.Remove the engine mounting
insulator and timing chain case assembly.
|
|
8.Remove the cylinder head
bolts.
|
|
For the installation procedure,
refer to GROUP 11B - Cylinder Head and Valves .
|
|
1.Apply a small amount of
engine oil to the cylinder head bolt threads and the
washers.
|
|
2.Temporarily install the
cylinder head bolt and washer assembly onto the cylinder
head.
|
|
3.Temporarily install the
timing chain case assembly and engine mounting
insulator.
|
|
4.Tighten the cylinder head
bolts (Refer to GROUP 11B - Cylinder Head and Valves
).
|
|
5.Install the engine hanger
(Refer to GROUP 11B - Fuel and Emission Parts ).
|
|
6.Install the brake booster
vacuum pipe (LHD: Refer to GROUP 35A - Master Cylinder
Assembly and Brake Booster Assembly , RHD: Refer
to GROUP 35A - Master Cylinder Assembly and Brake
Booster Assembly ).
|
|
7.Install special tool
engine hanger (MB991928 or MB991895) for holding the engine
assembly.
|
|
8.Remove the oil pan, engine
mounting insulator and timing chain case assembly.
|