|
1.Start the engine and allow
it to warm up until the temperature of the coolant reaches
80 °C to 90 °C.
|
|
2.
warning |
Use care as engine oil could
be hot.
|
Remove the oil filler cap.
|
![](../../../img/12/ACB03355AB00ENG.png)
|
3.Remove the oil drain plug
to drain engine oil. 4.Install a new oil drain
plug gasket and then tighten the oil drain plug to the
specified
torque. Tightening torque: 39 ± 5
N·m
|
![](../../../img/12/ACA00073AA00ENG.png)
|
5.Refill with specified
quantity of engine oil. Specified Engine
Oil
- ACEA classification: A1/B1, A3/B3,
A3/B4 or A5/B5
- ILSAC classification: ILSAC certificated
oil
- API classification: SG or higher
Quantity (Includes volume inside engine oil
filter): 3.0 L
note |
SAE 0W-20, 0W-30, 5W-30, and
5W-40 engine oils can only be used if they meet
ACEA A3/B3,
A3/B4 or A5/B5 and API SG (or higher)
specifications.
|
6.Install the engine oil filler
cap. 7.Let the engine run for a few
minutes. 8.Stop the engine, and then check the
engine oil level using the engine oil level gauge
after a few minutes.
|