|
- Check oil feeder control valve itself (Refer to
).
|
|
Q.
Is the check result normal?
|
|
Replace the oil feeder control valve.
|
|
|
|
- Disconnect connector, and measure at harness side.
- Ignition switch: ON
- Voltage between terminal OCV line and earth.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector(s), or check and repair the harness of short circuit
to earth, and open circuit in OCV line between engine control relay connector and oil feeder
control valve connector.
|
|
|
|
- Disconnect connector, and measure at harness side.
- Ignition switch: ON
- Voltage between terminal OCV line and earth.
|
|
Q.
Is the check result normal?
|
|
![](../../../buttons/03btn002.png)
Repair or replace the connector(s), or check
and repair the harness of short circuit to earth, and open circuit in OCV line between oil feeder
control valve connector and engine-ECU connector.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
- Reconfirmation of diagnosis code.
|
|
Q.
Is diagnosis code stored?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|