|
1.Remove vacuum hoses from
the purge control solenoid valve.
|
|
2.Disconnect the purge
control solenoid valve connector.
|
![](../../../img/17/AK402833AF00ENG.png)
|
3.Connect a hand vacuum pump
to nipple (A) of the solenoid valve (refer to the
illustration
at left). 4.Check airtightness by applying vacuum
with voltage applied directly from the battery
to the solenoid valve and without applying
voltage.
|
Battery
voltage
|
State of nipple
B
|
Normal
condition
|
Applied
|
opened
|
vacuum leaks
|
plugged
|
vacuum
maintained
|
Not applied
|
opened
|
vacuum
maintained
|
|
|
![](../../../img/17/AK700837AA00ENG.png)
|
5.Measure the resistance
between the terminals of the solenoid
valve. Standard value: 30 - 34 Ω
(at 20°C)
|