|
1.Remove the brake caliper
assembly and brake disc, and retain the brake caliper
assembly
with a wire and the like to prevent from falling (Refer to
).
|
![](../../../img/26/AC208063AB00ENG.png)
|
2.Set a dial gauge as shown
in the figure. Move the hub in the axial direction and
measure
the axial play. Limit: 0.05
mm 3.If the play exceeds the limit,
disassemble hub knuckle assembly to check each component.
If the wheel bearing is faulty, replace
it. 4.After checking, install the brake disc and
the brake caliper assembly (Refer to ).
|