note |
- You can start out the following operations from any TPMS transmitter. The tyre pressure sensor
ID registration has no order.
- On completion of the tyre pressure sensor ID code registration, the tyre pressure
sensor ID code is displayed on the M.U.T.-III screen.
- M.U.T.-III cannot identify which registered TPMS transmitter is used for each wheel.
For this reason, write down the tyre number for each wheel when the tyre number and ID code is
displayed on the M.U.T.-III during ID code registration.
- It may take approximately one minute for the ID code to be displayed on the M.U.T.-III screen
after the tyre pressure is reduced.
- If the ID code is not displayed, reduce the tyre pressure another 20 kPa or more.
If the ID code is not displayed yet, rotate the tyre to displace the TPMS transmitter, and reduce
the tyre pressure 20 kPa or more again.
- If the ID code cannot be registered for all the four wheels, the ETACS-ECU <vehicles without keyless
operation system> or KOS-ECU <vehicles with keyless operation system> may be faulty, thus
replace the ETACS-ECU <vehicles without keyless operation system> or KOS-ECU <vehicles with keyless
operation system>.
- If the ID code can be registered for one wheel or more, the TPMS transmitter in
which the code cannot be registered may be faulty, thus replace that TPMS transmitter.
|