![](../../../img/33/AC609382AB00ENG.png)
|
Replace the back side bushing
according to the following procedure.
|
![](../../../img/33/ACB03454AB00ENG.png)
|
1.Use the following special
tools to remove the bushing:
- MB990800 (Ball joint remover and installer)
- MB991389 (Bush remover base)
|
![](../../../img/33/ACB03455AB00ENG.png)
|
2.Use the following special
tools to locate the front suspension lower arm bushing
protrusion
as shown in the figure. Press-fit the special tool until it
reaches the lower arm assembly.
- MD998375 (Crankshaft front oil seal
installer)
- MB992868 (Base spacer)
- MB990643 (Base)
|