REAR WHEEL HUB ASSEMBLY INSIDE DIAMETER CHECK


caution
  • The vehicle speed detection encoder collects any metallic particle easily, because it is magnetised. Make sure that the encoder should not collect any metallic particle. <Vehicles with ABS or ASC>
  • Always keep magnetic substances away from the vehicle speed detection encoder. <Vehicles with ABS or ASC>
1.Remove the rear wheel hub assembly.

2.Measure the inside diameter of the rear wheel hub assembly at two or more locations.
Standard value: 203 mm
Limit: 205 mm
3.Replace the rear wheel hubs, shoe and lining assembly when wear exceeds the limit value or is badly imbalanced.