REMOVAL AND INSTALLATION

Pre-removal OperationBrake Fluid Draining

Post-installation OperationBrake Fluid Refilling and Air Bleeding (Refer to

			Removal steps
		1.	Connection between brake hose and brake caliper
		2.	Gasket
		3.	Brake caliper assembly
		·	Brake disc run-out check and correction (only at installation) (Refer to ).
<<A>>		4.	Brake disc
		5.	Brake hose connection
	>>A<<	6.	Brake hose

REMOVAL SERVICE POINTS

<<A>> BRAKE DISC REMOVAL

If the brake disc removal is difficult, install bolts (M8 x 1.25 mm) shown in the figure, and tighten them evenly and gradually to remove the brake disc.

INSTALLATION SERVICE POINT

>>A<< BRAKE HOSE INSTALLATION

Insert grommet to knuckle bracket securely as shown. The notch of grommet must be coincided with the top end of knuckle bracket.