WHEEL CYLINDER ASSEMBLY DISASSEMBLY AND REASSEMBLY



Disassembly steps


1.
 Boots


2.
 Piston assembly

>>A<<
 3.
 Piston

>>A<<
 4.
 Piston cup


5.
 Spring


6.
 Bleeder screw


7.
 Wheel cylinder body

ASSEMBLY SERVICE POINT

>>A<< PISTON CUP AND PISTON INSTALLATION
1.Use brake fluid DOT 3 or DOT 4 to clean the wheel cylinder and the piston.

2.
caution In order to keep the piston cup from becoming twisted or slanted, slide the piston cup down special tool MB991008 slowly and carefully, without stopping.
Apply brake fluid DOT 3 or DOT 4 to the piston cups and special tool installer (MB991008).
3.Set the piston cup on special tool MB991008 with the lip of the cup facing up. Fit the cup onto special tool, and then slide it down the outside of special tool into the piston groove.