![](../../../img/37/AC905486AC00ENG.png)
|
1.Install the nut to the end
of the steering column shaft. Then use the preload socket
(Special
tool: MB990326) to rotate the shaft at a rate of one turn
per 4 to 6 seconds, and then measure the
total rotation torque. Standard
value:
Total rotation torque: 1.25
N·m or less Torque fluctuation: 0.5
N·m or less
note |
Rotate by 180° in left
and right directions from the neutral position,
and measure
the total rotation torque.
|
2.When the measured value is not within the
standard value, replace the steering column
shaft assembly (Refer to ).
|