|
Use M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Repair the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table ).
|
|
|
|
Check the following service data .
|
|
- Item No. B11: Odometer:rec.V1
- Item No. B12: Power relay voltage:rec V1
- Item No. B13: Vehicle speed:rec.V1
- Item No. B21: Odometer:rec.V2
- Item No. B22: Power relay voltage:rec V2
- Item No. B23: Vehicle speed:rec.V2
- Item No. B31: Odometer:rec.V3
- Item No. B32: Power relay voltage:rec V3
- Item No. B33: Vehicle speed:rec.V3
- Item No. B41: Odometer:rec.V4
- Item No. B42: Power relay voltage:rec V4
- Item No. B43: Vehicle speed:rec.V4
- Item No. B51: Odometer:rec.V5
- Item No. B52: Power relay voltage:rec V5
- Item No. B53: Vehicle speed:rec.V5
|
|
Q.
Is the check result normal?
|
|
Check the combination meter and repair if necessary (Refer to GROUP 54A-combination
meter ). Then go to Step 5.
|
|
|
|
Start the engine and measure the battery voltage (Refer to GROUP 54A - Battery
Test ).
|
|
Q.
Is the check result normal?
|
|
Check the battery and repair if necessary (Refer to GROUP 54A - Battery ,
Removal and Installation ).
|
|
|
|
Start the engine and measure the charging system (Refer to GROUP 16 - Charging
System ).
|
|
Q.
Is the check result normal?
|
|
Check the charging system and repair if necessary (Refer to GROUP 16 - Alternator
Assembly ).
|
|
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent
Malfunction ).
|
|
|
|
Replace the EPS-ECU (Refer to ).
|
|
|