REMOVAL AND INSTALLATION

Post-installation operation

Door adjustment (Refer to ).

			Front door assembly removal steps
		·	Cowl side trim (Refer to GROUP 52A - Interior Trim ).
		1.	Wiring harness connector connection
		2.	Door check connecting bolt
		3.	Front door assembly
			Front door hinge removal steps
		3.	Front door assembly
		·	Fender (Refer to ).
		4	Front door upper hinge
		5.	Front door lower hinge
			Striker removal
	>>A<<	6.	Striker
			Damper removal
		7.	Damper
			Door switch removal
		8.	Door switch

			Rear door assembly removal steps
		1.	Wiring harness connector connection
		2.	Door check connecting bolt
		3.	Rear door assembly
			Rear door hinge removal steps
		·	Centre pillar trim (Refer to GROUP 52A - Interior Trim ).
		3.	Rear door assembly
		4.	Rear door upper hinge
		5.	Rear door lower hinge
			Striker removal steps
	>>A<<	6.	Striker
			Damper removal
		7.	Damper
			Door switch removal
		8.	Door switch

INSTALLATION SERVICE POINT

>>A<< STRIKER INSTALLATION

Install the striker so that the striker centre does not deviate more than ±1.5 mm from the latch centre.