CUSTOMISATION FUNCTION



Using the ETACS system of M.U.T.-III, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
Adjustment item (M.U.T.-III display)
Adjustment item
Adjusting content (M.U.T.-III display)
Adjusting content
Hazard answer back
Adjustment of the number of keyless hazard warning lamp answer back flashes <Vehicles with keyless entry system>
Lock:1, Unlock:2
LOCK: Flashes once, UNLOCK: Flashes twice (Initial condition)
Lock:1, Unlock:0
LOCK: Flashes once, UNLOCK: No flash
Lock:0, Unlock:2
LOCK: No flash, UNLOCK: Flash twice
Lock:2, Unlock:1
LOCK: Flash twice, UNLOCK: Flash once
Lock:2, Unlock:0
LOCK: Flash twice, UNLOCK: No flash
Lock:0, Unlock:1
LOCK: No flash, UNLOCK: Flash once
Lock:0, Unlock:0
No function
Auto fold mirror
Electric retractable mirror operation adjustment
Not Auto
No synchronised operation
Open Vehicle SPD
Vehicle speed-dependent operation
Open/Close by IG
Ignition switch linked operation
OPN/CLS Keyless
Keyless entry linked operation (Initial condition)
Multi mode RKE
Multi-mode keyless entry function customisation
Disable
No function
D-spec
Door mirror fold/unfold operation. (Initial condition)
Timer lock timer
Timer lock period adjustment
30 sec.
30 seconds (Initial condition)
60 sec.
60 seconds
120 sec.
120 seconds
180 sec.
180 seconds