INSPECTION


DOOR MIRROR ASSEMBLY OPERATION CHECK
Remove the front door sash trim, and then connect the battery to the door mirror body assembly connector to check that the outside rear-view mirror operates.

Battery connection
 Direction operation

  • Connect terminal 13 to the negative battery terminal.
  • Connect terminal 4 to the positive battery terminal.

 Up

  • Connect terminal 13 to the positive battery terminal.
  • Connect terminal 4 to the negative battery terminal.

 Down

  • Connect terminal 13 to the negative battery terminal.
  • Connect terminal 12 to the positive battery terminal.

 Right

  • Connect terminal 13 to the positive battery terminal.
  • Connect terminal 12 to the negative battery terminal.

 Left

  • Connect terminal 14 to the positive battery terminal.
  • Connect terminal 5 to the negative battery terminal.

 Retract

  • Connect terminal 14 to the negative battery terminal.
  • Connect terminal 5 to the positive battery terminal.

 Return

DOOR MIRROR CONTROL SWITCH CONTINUITY CHECK

Switch position
 Tester connection
 Specified condition
OFF
 1 - 2, 1 - 3, 1 - 6, 1 - 11, 2 - 9, 3 - 6, 3 - 9, 4 - 5, 6 - 9, 9 - 11
 Open circuit
Left side
 OFF
 1 - 6, 1 - 11, 3 - 6, 4 - 5, 6 - 9, 9 - 11
 Open circuit
Up
 1 - 6, 9 - 10, 9 - 11
 Continuity exists (2 Ω or less)
Down
 1 - 11, 6 - 9
Right
 1 - 6, 9 - 10
Left
 3 - 6, 4 - 5
Right side
 OFF
 1 - 2, 1 - 3, 1 - 6, 2 - 9, 3 - 9, 6 - 9
 Open circuit
Up
 1 - 6, 3 - 9
 Continuity exists (2 Ω or less)
Down
 1 - 3, 6 - 9
Right
 1 - 6, 2 - 9
Left
 1 - 2, 6 - 9
Retract and return
 1 - 4
 Continuity exists (2 Ω or less)