REMOVAL AND INSTALLATION

Removal steps ·. Glove box (Refer to ). <<A>> 1. Instrument centre panel 2. Radio and CD player <Uniq type> (Refer to GROUP 54A - Radio with CD Player ) or Radio and CD player <1Din type> (Refer to GROUP 54A - Radio with CD player ) 3. Accessory box (Refer to GROUP 54A - Radio with CD Player ) 4. Bracket (LH/RH) 5. Radio plug <Audio less> ·. Floor console assembly (Refer to ). ·. Outside/Inside air selection damper control cable connection (Refer to GROUP 55A - Heater Control Unit ). · Mode selection damper control cable connection (Refer to GROUP 55A - Heater Control Unit ) 6. Heater controller assembly <Vehicles with Cooler> (Refer to GROUP 55A - Heater Control Unit ) or Automatic A/C controller assembly (Refer to GROUP 55B - Automatic A/C Controller Assembly )

2.Insert your hand through the instrument panel opening, and push up the clip shown in the illustration from the back of instrument centre panel. 3.Remove the instrument centre panel starting from the clearance made by pushing the clip up.