Code No.B1519: SRS-ECU connector lock out of order
DIAGNOSIS CODE SET CONDITIONS
This diagnosis code is set if a poor connection at the SRS-ECU is detected.
PROBABLE CAUSES
- Damaged connectors
- Malfunction of the SRS-ECU
|
STEP 1. M.U.T.-III CAN bus diagnostics
|
|
Use M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Go to Step 2.
|
|
|
|
Repair the CAN bus line (Refer to GROUP 54C - Troubleshooting ).
|
|
|
|
STEP 2. Check whether the diagnosis code is set again.
|
|
(1)Connect the negative battery terminal.
|
|
(2)After erasing the diagnosis code memory, check the diagnosis code again.
|
|
(3)Disconnect the negative battery terminal.
|
|
Q.
Is diagnosis code B1519 set?
|
|
Go to Step 3.
|
|
|
|
The diagnosis is complete (diagnosis code No. B1519 is set due to improper engaged connector).
|
|
|
|
STEP 3. Check at the SRS-ECU connector.
|
|
(1)Disconnect the SRS-ECU connector.
|
|
(2)Check the connector lock switch terminal inside the harness side connector for improper contact or deformation.
|
|
Q.
Is the connector lock switch normal?
|
|
Go to Step 4.
|
|
|
|
Replace the connector.
|
|
|
|
STEP 4. Check whether the diagnosis code is set again.
|
|
Q.
Is diagnosis code No. B1519 set?
|
|
Replace SRS-ECU (Refer to ).
|
|
|
|
Intermittent Malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ).
|
|
|