|
|
Enter the speaker connection
check mode according to the following steps:
|
|
1.Turn the Ignition
switch to the "ACC" or "ON" position and switch off the
radio and CD player.
2.Press the following
buttons in that order within sixty seconds from step
(1).
(1)
[CH1] button
(2)
Fast-reverse/Track down button
(3)
Fast-forward/Track up button
(4)
[CH6] button
|
|
3.Check that the
speaker, which is displayed on the centre panel
display, sounds (If the [CH6] button is
pressed, the speaker will be changed).
| note |
- The display of "FL", "FR",
"RL", "RR" blinks.
- If no speakers sound, any of
the speaker circuits is
short-circuited. Follow the
troubleshooting
"No sound is heard". (Refer to
Radio and CD Player -
Troubleshooting
 .)
|
4.If a button other than the
[CH6] button is pressed, or the ignition
switch is turned to "LOCK" (OFF) position, you will
exit from the speaker connection check mode.
|
|
|
Inserting a CD (MR397836)
during the speaker connection check mode shifts the
mode to the buzz noise check mode, and the buzz noise
sound of each speaker can be checked.
|
|
|
As with the speaker connection
check mode, press the [CH6] button to
switch the output speaker of the buzz noise check
sound.
|
|
|
Check that the buzz noise sound
is output from the output speaker of buzz noise check
sound.
|