Tool
|
Number
|
Name
|
Use
|
|
- MB992744
- MB992745
- MB992746
- MB992747
- MB992748
|
- Vehicle communication interface-Lite
(V.C.I.-Lite)
- V.C.I.-Lite main harness A (for vehicles
with CAN communication)
- V.C.I.-Lite main harness B (for vehicles
without CAN communication)
- V.C.I.-Lite USB cable short
- V.C.I.-Lite USB cable long
|
Laser radar check
(Diagnosis code display and data list display by
M.U.T.-III)
|
|
MB991955
- MB991824
- MB991827
- MB991910
- MB991911
- MB991825
- MB991826
|
M.U.T.-III
sub-assembly
- Vehicle Communication Interface
(V.C.I.)
- M.U.T.-III USB cable
- M.U.T.-III main harness A (Vehicles with
CAN communication system)
- M.U.T.-III main harness B (Vehicles without
CAN communication system)
- M.U.T.-III measurement adapter
- M.U.T.-III trigger harness
|
| caution |
For vehicles with CAN
communication, use M.U.T.-III main harness A to
send simulated vehicle speed. If you connect
M.U.T.-III main harness B instead, the CAN
communication does not function
correctly.
|
Laser radar check (Diagnosis code display and data
list display by M.U.T.-III)
|
|
MB991499
|
Measurement
probe
|
Measurements of
voltage and resistance value
| note |
M.U.T.-II attached probe
(Commercial probes can also be used.)
|
|
|
MB991223
- MB991219
- MB991220
- MB991221
- MB991222
|
Harness
set
- Check harness
- LED wiring harness
- LED wiring harness adapter
- Probe
|
Continuity check
and voltage measurement at harness wire or
connector
- Contact pressure inspection at connector
pin
- Power supply circuit inspection
- Power supply circuit inspection
- Commercial tester connection
|
|
MB992006
|
Extra fine
probe
|
Continuity check
and voltage measurement at harness wire or
connector
|
|
MB990784
|
Ornament
remover
|
Removal of
cover
|