SPECIAL TOOLS


Tool
 Number
 Name
 Use


MB991223

  1. MB991219
  2. MB991220
  3. MB991221
  4. MB991222
 Harness set

  1. Test harness
  2. LED harness
  3. LED harness adapter
  4. Probe
 Making voltage and resistance measurements during troubleshooting

  1. Connect pin contact pressure inspection
  2. Power circuit inspection
  3. Power circuit inspection
  4. Commercial tester connection


MB992006
 Extra fine probe
 Continuity check and voltage measurement at harness wire or connector



  1. MB992744
  2. MB992745
  3. MB992746
  4. MB992747
  5. MB992748
  1. Vehicle communication interface-Lite (V.C.I.-Lite)
  2. V.C.I.-Lite main harness A (for vehicles with CAN communication)
  3. V.C.I.-Lite main harness B (for vehicles without CAN communication)
  4. V.C.I.-Lite USB cable short
  5. V.C.I.-Lite USB cable long

 Check the A/C (The M.U.T.-III diagnosis codes display, service data display and actuator test)


MB991955

  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991825
  6. MB991826
 M.U.T.-III sub-assembly

  1. Vehicle Communication Interface (V. C. I).
  2. USB cable
  3. M.U.T.-III main harness A (applicable to vehicles with CAN communication)
  4. M.U.T.-III main harness B (applicable to vehicles without CAN communication)
  5. Measurement adapter
  6. Trigger harness
caution For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
Check the A/C (The M.U.T.-III diagnosis codes display, service data display and actuator test)