|
If air volume cannot be adjusted by using the blower control, the A/C control
panel, the auto A/C controller assembly (A/C-ECU) or the power transistor
may be faulty.
|
|
- Malfunction of the A/C control panel
- Malfunction of the power transistor
- Damaged wiring harness or connectors
- Malfunction of the auto A/C controller assembly (A/C-ECU)
|
|
Use the M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Repair the CAN bus lines (Refer to GROUP 54C, Troubleshooting ).
|
|
|
|
Check that the diagnosis code related to the air conditioner is not set.
|
|
Q.
Is the diagnosis code set?
|
|
Carry out the diagnosis code procedures. Refer to .
|
|
|
|
(1)Disconnect the connector, and measure at the wiring harness side.
|
|
(2)Continuity between terminal 2 and body earth OK: Continuity exists (2 Ω
or less)
|
|
Q.
Is the check result normal?
|
|
Repair the wiring harness wires between power transistor connector terminal No.
1 and body earth.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
All the following items in the data list should be normal.
|
|
Item No.68:Front blower fan
|
|
Q.
Is the check result normal?
|
|
Replace the auto A/C controller assembly (A/C-ECU).
|
|
|
|
Check that the blower motor operates normally.
|
|
Q.
Does the blower motor work normally?
|
|
This diagnosis is complete.
|
|
|
|
Replace the auto A/C controller assembly (A/C-ECU).
|
|
|