|
This code is set when the mode selection damper control motor potentiometer does not send
any signal to the A/C-ECU due to short or open circuit.
|
|
- Malfunction of the mode selection damper control motor and potentiometer
- Damaged the wiring harness or connectors
- Malfunction of the auto A/C controller assembly (A/C-ECU).
|
|
Check that the following service data display contents are normal.
|
|
Item No.55: Air outlet c/o potentiometer Item No.56: Air outlet c/o potentio.(Target)
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
Replace the mode selection damper control motor and potentiometer.
|
|
|
|
Q.
Is the diagnosis code set?
|
|
Replace the auto A/C controller assembly (A/C-ECU).
|
|
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00, How to Cope
with Intermittent Malfunction ).
|
|
|