SPECIAL TOOLS


Tool
 Number
 Name
 Use


MB991955

    A: MB991824
    B: MB991827
    C: MB991910
    D: MB991911
    E: MB991825
    F: MB991826
 M.U.T.-III sub assembly

    A: Vehicle communication interface (V.C.I.)
    B: M.U.T.-III USB cable
    C: M.U.T.-III main harness A (Vehicles with CAN communication system)
    D: M.U.T.-III main harness B (Vehicles without CAN communication system)
    E: M.U.T.-III measurement adapter
    F: M.U.T.-III trigger harness
  • Drive belt tension check
  • Checking the ignition timing
  • Checking the idle speed
  • Erasing the diagnosis code
caution For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.



MB991668
 Belt tension meter set
 Drive belt tension check (used together with M.U.T.-III)


MB990767
 Front hub and flange yoke holder
 Holding the camshaft sprocket


MD998719
 Pin


MD998772
 Valve spring compressor
 Compressing valve spring


MB991999
 Valve stem seal installer
 Valve stem seal installation


MD998713
 Camshaft oil seal installer
 Camshaft oil seal installation


MD998727
 Oil pan FIPG cutter
 Oil pan removal


MD998781
 Flywheel stopper
  • Supporting the flywheel assembly <M/T>
  • Supporting the A/T drive plate <A/T>


MB990938
 Installer bar
 Crankshaft rear oil seal installation


MD998776
 Crankshaft rear oil seal installer


MD998285
 Crankshaft front oil seal guide
 Crankshaft front oil seal installation


MD998375
 Crankshaft front oil seal installer


MD998738
 Adjusting bolt
 Supporting the timing belt tensioner arm and timing belt tensioner adjuster


MB991654
 Cylinder head bolt wrench (12)
 Removal and installation of cylinder head bolt


MB991367
 Special spanner
 Holding the crankshaft camshaft drive sprocket


MB991385
 Pin


MD998767
 Tensioner wrench
 Valve timing belt tension adjustment


MB991454
 Engine hanger balancer
 When the engine hanger is used: Supporting the engine assembly during removal and installation of the transmission assembly
note Special tool MB991454 is a part of engine hanger attachment set MB991453.


MB991527
 Hanger


MB991895
 Engine hanger


MB991928

    A: MB991929
    B: MB991930
    C: MB991931
    D: MB991932
    E: MB991933
    F: MB991934
 Engine hanger

    A: Joint (50) × 2
    B: Joint (90) × 2
    C: Joint (140) × 2
    D: Foot (standard) × 4
    E: Foot (short) × 2
    F: Chain and hook assembly