|
|
The following operations will be
needed due to the introduction of the serpentine drive
system with the drive belt auto-tensioner.
|
|
1.Securely insert the
spindle handle or ratchet handle with a 12.7 mm insertion
angle into the jig hole of the auto-tensioner.
2.Rotate the auto-tensioner anti-clockwise and
align hole A with hole B.
|
|
3.
| caution |
To reuse the drive belt, draw
an arrow indicating the rotating direction
(clockwise) on the back of the belt using chalk,
etc.
|
Insert an L-shaped hexagon wrench, etc. into the
hole to fix and then remove the drive belt.
|
).