FUEL PUMP RELAY DISCONNECTION (HOW TO REDUCE PRESSURIZED FUEL LINES)


warning When removing the fuel pipe, etc., release fuel pressure to prevent fuel spray.


1.Remove the instrument panel fuse box lid <L.H. drive vehicles> or instrument panel parcel box <R.H. drive vehicles> (Refer to GROUP 52A - Instrument Panel ).


2.Remove the fuel pump relay (2) in the the junction block.
3.Crank the engine for at least two seconds.
4.If the engine is not started, turn the ignition switch to the "LOCK (OFF)" position.
5.If the engine is started, turn the ignition switch to the "LOCK (OFF)" position after the engine stopped.
6.Install the fuel pump relay (2).
7.Install the instrument panel fuse box lid <L.H. drive vehicles> or instrument panel parcel box <R.H. drive vehicles> (Refer to GROUP 52A - Instrument Panel ).