2.Measure the resistance between terminals No. 1 and No. 2 at the throttle valve control servo connector.
Standard value: 0.3 - 100 Ω (at 20°C)
3.If resistance is outside the standard value, replace the throttle body assembly.
OPERATION CHECK |
| 1.Remove the air intake hose
from the throttle body. |
| 2.Turn the ignition switch
to "ON" position. |
| 3.Operate the accelerator
pedal and confirm that the throttle valve is opening and
closing accordingly. |
CHECK THE COIL RESISTANCE |
|
1.Disconnect the
electronic-controlled throttle valve
connector. 2.Measure the resistance between terminals No. 1 and No. 2 at the throttle valve control servo connector. Standard value: 0.3 - 100 Ω (at 20°C) 3.If resistance is outside the standard value, replace the throttle body assembly. |