|
1.Disconnect the oil control
valve connector.
| caution |
To prevent the coil from
burning, keep the duration of the voltage
application as short as possible.
|
2.Apply battery voltage to the terminals of
the connector at the oil control valve, and make sure the
oil control valve makes a clicking sound.
|
|
|
1.Disconnect the oil control
valve connector.
|
|
|
2.Measure the resistance
between the terminals of the connector at the oil control
valve.
|
|
|
Standard value: 6.9
- 7.9 Ω (at 20°C)
|
|
|
3.If resistance is outside
the standard value, replace the oil control valve.
|