|
- Measure battery voltage at cranking.
|
|
Q.
Is the check result normal?
|
|
Check battery (Refer
to GROUP 54A - Battery-On-vehicle Service -
Battery
Test ).
|
|
|
|
OK:
ON
(Ignition switch: ST) OFF (Ignition switch:
ON)
|
|
Q.
Is the check result normal?
|
![](../../../img/13/AK305625AB00ENG.png)
|
Q.
Is the check result normal?
Go to Step 4
.
Repair or
replace.
|
![](../../../img/13/AK305625AB00ENG.png)
|
- Disconnect connector, and measure at the harness
side.
- Ignition switch: ST
- Voltage between terminal No. 51 and earth.
OK: System voltage
Q.
Is the check result normal?
Go to Step 7
.
Go to Step 5
.
|
![](../../../img/13/AK305632AB00ENG.png)
|
Q.
Is the check result normal?
Go to Step 6
.
Repair or
replace.
|
![](../../../img/13/AK305632AB00ENG.png)
|
- Disconnect connector, and measure at the harness
side.
- Ignition switch: ST
- Voltage between terminal No. 10 and earth.
OK: System voltage
Q.
Is the check result normal?
Go to Step 9
.
Go to Step 7
.
|
![](../../../img/13/AK305894AB00ENG.png)
|
Q.
Is the check result normal?
Go to Step 8
.
Repair or
replace.
|
![](../../../img/13/AK305632AB00ENG.png)
![](../../../img/13/AK305894AB00ENG.png)
|
- Check ignition switch (Refer to GROUP 54A -
Ignition
switch - Ignition Switch - Inspection
).
Q.
Is the check result normal?
![](../../../buttons/03btn001.png)
Check
intermediate connector C-18 and repair
if necessary. If intermediate connector is normal, check
and repair harness between B-111 (terminal
No. 10) inhibitor switch connector and C-307 (terminal
No. 5) ignition switch connector.
- Check power supply line for open/short
circuit.
Replace
ignition switch.
|
![](../../../img/13/AK305632AB00ENG.png)
![](../../../img/13/AK305625AB00ENG.png)
|
- Check ignition switch itself (Refer to GROUP 23A
- On - vehicle
Service - A/T Control Component Check -
Inhibitor Switch Check
).
Q.
Is the check result normal?
![](../../../buttons/03btn001.png)
Check
intermediate connectors B-17, and repair
if necessary. If intermediate connector are normal,
check and repair harness between B-111 (terminal
No. 9) inhibitor switch connector and C-111 (terminal
No. 51) engine-A/T-ECU connector.
- Check power supply line for open/short
circuit.
Replace
inhibitor switch.
|
![](../../../img/13/AK305632AB00ENG.png)
![](../../../img/13/AK305631AB00ENG.png)
|
Q.
Is the check result normal?
![](../../../buttons/03btn001.png)
Check
intermediate connectors B-17, and repair
if necessary. If intermediate connectors are normal,
check and repair harness between B-111 (terminal
No. 9) inhibitor switch connector and B-116 (terminal
No. 1) starter connector.
- Check output line for short
circuit.
Repair or
replace.
|
![](../../../img/13/AK305631AB00ENG.png)
|
Q.
Is the check result normal?
![](../../../buttons/03btn001.png)
Repair or
replace.
|
![](../../../img/13/AK305631AB00ENG.png)
|
- Disconnect connector, and measure at the harness
side.
- Ignition switch: ST
- Voltage between terminal No. 1 and earth.
OK: System voltage
Q.
Is the check result normal?
Go to Step
14 .
Go to Step
13 .
|
![](../../../img/13/AK305632AB00ENG.png)
![](../../../img/13/AK305631AB00ENG.png)
|
Q.
Is the check result normal?
![](../../../buttons/03btn001.png)
Check
intermediate connectors B-17, and repair
if necessary. If intermediate connectors are normal,
check and repair harness between B-111 (terminal
No. 9) inhibitor switch connector and B-116 (terminal
No. 1) starter connector.
- Check output line for open circuit and
damage.
Repair or
replace.
|
![](../../../img/13/AK305630AB00ENG.png)
|
Q.
Is the check result normal?
![](../../../buttons/03btn001.png)
Repair or
replace.
|
![](../../../img/13/AK305630AB00ENG.png)
|
- Disconnect connector, and measure at the harness
side.
- Voltage between terminal No. 1 and earth.
OK: System voltage
Q.
Is the check result normal?
![](../../../buttons/03btn001.png)
![](../../../buttons/03btn002.png)
Check
and repair harness between B-115 (terminal No.
1) starter connector and battery.
- Check power supply line for open/short
circuit.
|
![](../../../img/13/AK305632AB00ENG.png)
![](../../../img/13/AK305631AB00ENG.png)
|
note |
Before checking harness, check
intermediate connectors B-17 and repair if
necessary.
|
- Check output line for damage.
Q.
Is the check result normal?
Go to Step
17 .
Repair.
|
![](../../../img/13/AK305630AB00ENG.png)
|
- Check power supply line for damage.
Q.
Is the check result normal?
Replace
starter.
Repair.
|