|
1.Remove the second seat
assembly, the rail cover outer and the rail cover inner.
(Refer to GROUP 52A, Second Seat Assembly Removal and
Installation ).
|
|
2.Remove the rear scuff
plate (Refer to GROUP 52A, Trim Removal and Installation ), and turn
up the floor mat.
|
![](../../../img/13/AC301331AC00ENG.png)
|
3.Remove the rear floor fuel
gauge maintenance hole cover (RH).
|
![](../../../img/13/AC301291AC00ENG.png)
|
4.Disconnect the fuel tank
gauge unit connector.
|
![](../../../img/13/AC301328AC00ENG.png)
|
5.
caution |
When withdrawing the fuel tank
gauge unit from the service hole, be careful not
to damage the gauge and the float.
|
Remove the fuel tank gauge unit mounting nuts and
remove the fuel tank gauge unit from service
hole. 6.Replace the fuel tank gauge unit gasket
with a new one. 7.
caution |
When installing the fuel tank
gauge unit into the fuel tank from the service
hole, be careful not to damage the gauge and the
float.
|
Install the fuel tank gauge unit into the fuel tank
via the service hole, and tighten the mounting
nuts. 8.Connect the fuel tank gauge unit
connector. 9.Install the rear floor fuel gauge
maintenance hole cover (RH). 10.Return the floor
carpet and install the rear scuff plate. (Refer to GROUP
52A, Trim Removal and Installation ). 11.Install
the rail cover inner, the rail cover outer and the second
seat assembly. (Refer to GROUP 52A, Second Seat Assembly
Removal and Installation ).
|