REMOVAL AND INSTALLATION

Air cleaner removal steps 1. Air cleaner resonator 2. Air cleaner air flow sensor connector 3. Air cleaner element 4. Harness clamp 5. Air cleaner air flow sensor and air cleaner cover assembly 6. Air cleaner air flow sensor assembly 7. Air cleaner cover 8. Air cleaner intake duct 9. Air cleaner body assembly bolts · Battery terminal connection 10. Harness clamp 11. Air cleaner body assembly 12. Harness clamp 13. Air cleaner bracket 14. Breather hose connection · Engine cover (Refer to GROUP 11A, Camshaft and Valve Stem Seal .) 15. Air cleaner resonator and air intake hose assembly <<A>> >>A<< 16. Air cleaner resonator <<A>> >>A<< 17. Hose clip 18. Air intake hose Air cleaner element removal steps 1. Air cleaner resonator 8. Air cleaner intake duct <For severely dusty area only> 9. Air cleaner assembly bolts <For severely dusty area only> <<B>> 3. Air cleaner element

Break off the tip of hose clip claw and spread out the hose clip, then remove the air cleaner resonator. note If there is a hose clip claw, the hose clip cannot spread to capacity.

1. caution When the air cleaner element is removed and installed, air cleaner cover may be interfered with front deck garnish mounting bolt and be damaged. To prevent the damage, attach the protection tape around the air cleaner resonator installation position of air cleaner cover. Open the air cleaner cover so that the air cleaner resonator installation position can be entered under the front deck.

2. caution The prefilter fixing pins of air cleaner element may be broken. To prevent the damage, forcibly do not remove and install the air cleaner element. Ensure an opening and remove the air cleaner element. note If the prefilter fixing pins are broken, the measures are as follows. If there are two pins diagonally, it is reusable. Thoroughly remove the broken pins. Install so that prefilter would not be bent.