![](../../../img/17/AK100012AC00ENG.png)
![](../../../img/17/AK100013AA00ENG.png)
|
1.Disconnect the vacuum hose
from the solenoid valve. 2.Disconnect the harness
connector. 3.Connect a hand vacuum pump to nipple
(A) of the solenoid valve (refer to the illustration
at left). 4.Check airtightness by applying a
vacuum with voltage applied directly from the battery
to the purge control solenoid valve and without applying
voltage.
|
Battery
voltage
|
Normal
condition
|
Applied
|
Vacuum leaks
|
Not applied
|
Vacuum
maintained
|
|
5.Measure the resistance between the
terminals of the solenoid valve. Standard
value: 30 -
34 Ω
(at 20°C)
|