REMOVAL AND INSTALLATION

Post-installation OperationClutch Pedal Adjustment (Refer to

		Removal steps
	·	Instrument panel under cover (Refer to GROUP 52A, Instrument panel ).
	1.	Stopper
	2.	Snap pin
	3.	Clevis pin
	4.	Clutch master cylinder mounting nut
	5.	Clutch pedal assembly mounting bolt
	6.	Pedal pad
	7.	Pedal stopper
	8.	Clutch pedal assembly
>>A<<	9.	Clutch pedal stopper

INSTALLATION SERVICE POINTS

>>A<< CLUTCH PEDAL STOPPER INSTALLATION

1.Insert the clutch pedal stopper straight into the stud bold of the floor.
2.Install the clutch pedal stopper securely by turning it clockwise until its underside contacts with the body bracket as shown in the figure.
3.After the installation, slightly pull the clutch pedal stopper by hand to check that it cannot be removed easily (appropriate holding power: 100N or more).