DISASSEMBLY AND REASSEMBLY

			Removal steps
		1.	Clutch fluid line bracket
		2.	Insulator
		3.	Washer
		4.	Clutch tube
		5.	Clutch tube
		6.	Tube clip
		7.	Clutch orifice
		8.	Union bolt
		9.	Union
		10.	Gasket
		11.	Clutch release cylinder
	>>B<<	12.	Clutch cover
	>>B<<	13.	Clutch disc
		14.	Return clip
		15.	Clutch release bearing
<<A>>	>>A<<	16.	Release fork
		17.	Release fork boot
		18.	Fulcrum

REMOVAL SERVICE POINT

<<A>> RELEASE FORK REMOVAL

Move the release fork in the direction shown to remove the clip from the fulcrum.

INSTALLATION SERVICE POINTS

>>A<< RELEASE FORK INSTALLATION

1.Apply grease to the illustrated positions of the release fork.
Specified grease:
Mitsubishi genuine grease Part No.0101011 or equivalent
2.Install the release fork to the fulcrum.

>>B<< CLUTCH DISC AND CLUTCH COVER INSTALLATION

1.Apply grease to the clutch disc splines and rub it in the splines with a brush.
Specified grease:
Mitsubishi genuine grease Part No.0101011 or equivalent
2.Using the clutch disc guide to position the clutch disc on the flywheel.
3.Install the clutch cover onto the flywheel.