|
Q.
Does the idle speed meet the standard values?
|
|
Refer
to GROUP 11A , On-vehicle Service - Idle
Speed Check.
|
|
|
|
Q.
Are the transmission and engine mount loose or damaged?
|
|
Tighten or replace the part. Then
go to Step 7 .
|
|
|
![](../../../img/22/AC102278AO00ENG.png)
|
Q.
Is the oil level up to the lower edge of the filler plug hole?
Go to Step 4
.
Refill
gear oil API classification GL-4 SAE 75W-85W or 75W-90.
Then go to Step 7 .
|
|
Q.
Is the specified oil gear oil API classification GL-4 SAE 75W-85W or
75W-90?
|
|
If in doubt, replace the oil.
Refer to . Then
go to Step 7 .
|
|
|
|
Q.
Does the axial play of the input and output shafts meet the standard
value?
|
|
Adjust the axial play of the
input and output shafts. Then go to Step 7 .
|
|
|
|
Q.
Are the gears worn or damaged?
|
|
Replace the gears. Go to Step 7
.
|
|
|
|
Q.
Is the noise or vibration still there?
|
|
The
procedure is complete.
|
|
|