Inspection Procedure 2: Oil Leaks
DIAGNOSIS PROCEDURE
STEP 1. Visual check.
Raise the vehicle, and check for oil leaks. If oil leak is difficult to locate, steam clean the transmission and drive the vehicle for at 10 minutes. Then check the leak again.
Q.
Is the oil leak(s) found?
Go to Step 2.
Check for the oil leaks around the engine. Then go to Step 4.
STEP 2. Visual check at the clutch housing.
Q.
Do oil leaks appear around the joint between the engine and the clutch housing?
Remove the transmission. Check the input shaft oil seal, and replace if necessary. Then go to Step 4.
Go to Step 3.
STEP 3. Check the oil seal or O-ring for damage.
Q.
Is the oil seal or O-ring damaged?
Replace the oil seal or the O-ring. Then go to Step 4.
Go to Step 4.
STEP 4. Retest the system.
Q.
Is the oil still leaking?
Return to Step 1.
The procedure is complete.