|
1.Drain the A/T fluid and
remove the valve body cover.
|
![](../../../img/23/AC002219CF00ENG.png)
|
2.Remove the A/T fluid
temperature sensor.
|
![](../../../img/23/AC503116AB00ENG.png)
|
3.Measure the resistance
between A/T control solenoid valve assembly connector
terminals 1 and 2. Standard value:
|
Fluid
temperature
(°C)
|
Resistance
value
(kΩ)
|
0
|
16.7 -
20.5
|
20
|
7.3 -
8.9
|
40
|
3.4 -
4.2
|
60
|
1.9 -
2.2
|
80
|
1.0 -
1.2
|
100
|
0.57 -
0.69
|
|
note |
The A/T fluid
temperature warning lamp on the combination
meter flashes when
the temperature reaches approximately 125
°C or higher and then stops flashing when
the temperature drops below approximately
115°C.
|
4.If the A/T fluid temperature sensor
resistance and the temperature when the
N range indicator is flashing or switched off are outside
the standard value ranges, replace the
A/T fluid temperature sensor.
|