|
1.Removal the A/T
control relay.
|
|
2.Use the jumper leads to
connect A/T control relay terminal 2 to the negative
battery terminal and terminal 3 to the positive battery
terminal.
3.Check the continuity between A/T
control relay connector terminals 1 and 4 while alternately
connecting and disconnecting the jumper leads from the
battery terminals.
|
|
Jumper
leads
|
Continuity between
terminals 1 and 4
|
Connected
|
Less than 2
Ω
|
Disconnected
|
Open circuit
|
|
4.If there is a malfunction, replace the
A/T control relay.
|