Inspection
Procedure 11: Does not shift properly (all points)
COMMENTS ON TROUBLE SYMPTOM
If all shift points are early or late while driving, the cause is probably a malfunction
of the output shaft speed sensor, throttle position sensor, or engine-A/T-ECU.
PROBABLE CAUSES
- Malfunction of output shaft speed sensor
- Malfunction of throttle position sensor
- Malfunction of the engine-A/T-ECU
|
|
STEP 1. M.U.T.-III data list
|
|
|
Item 0002: Output shaft speed sensor (Refer to data list reference table  ).
|
|
|
Q.
Is the check result normal?
|
|
|
 Go to Step 2.
|
|
|
|
|
|
 Refer to diagnosis code 23: Output shaft speed sensor system .
|
|
|
|
|
|
STEP 2. M.U.T.-III data list
|
|
|
Item 11: Throttle position sensor (Refer to data list reference table ).
|
|
|
Q.
Is the check result normal?
|
|
|
Go to Step 3.
|
|
|
|
|
|
Check the throttle position sensor system (Refer to GROUP 13A, Troubleshooting <Except
for Hong Kong and Singapore> or Refer to GROUP 13B, Troubleshooting <Vehicles
for Hong Kong and Singapore>).
|
|
|
|
|
|
STEP 3. M.U.T.-III actuator test
|
|
|
(1)Item 14: INVECS-II cancel command
|
|
|
(2)Test drive the vehicle (Refer to Road Test, Inspection procedure 8 ).
|
|
|
(3)Check that the gear shifting corresponds to the standard shift line of the shift
pattern diagram.
|
|
|
Q.
Is the check result normal?
|
|
|
The inspection is complete.
|
|
|
|
|
|
Replace the engine-A/T-ECU.
|
|
|
|