![](../../../img/23/AC311593AB00ENG.png)
|
If there is a problem with any of
the A/T system, the N range lamp will flash at a rate
of approximately once per second. If the N range lamp is
flashing at a rate of approximately once per second, check
the diagnosis output. N range lamp flashing
item
- Input shaft speed sensor system
- Output shaft speed sensor system
- Solenoid valve system
- Non-synchronization at various shift ranges
- A/T control relay system
note |
If the "N" range lamp is
flushing approximately twice per second, the
A/T fluid temperature is high. (It flushes
when the fluid is approximately 125°C or
more and goes off when the fluid is
approximately 115°C or less).
|
|
|
Use the M.U.T.-III to read the
diagnosis code (Refer to GROUP 00 - How to Use
Troubleshooting/Inspection Service Points ).
|
|
Use the M.U.T.-III to erase the
diagnosis code (Refer to GROUP 00 - How to Use
Troubleshooting/Inspection Service Points ).
|