REMOVAL AND INSTALLATION


caution When removing and installing the key interlock and shift lock cable, be careful not to hit the SRS-ECU.
Pre-removal Operation
  • Selector Lever Assembly Removal (Refer to ).

 Post-installation Operation
  • Selector Lever Assembly Installation (Refer to ).
  • Key Interlock and Shift Lock Mechanism Check (Refer to ).
  • Selector lever operation check (Refer to ).




Removal steps for key interlock cable


·
 Lower panel (Refer to GROUP 52A - Instrument Panel ).


·
 Steering column cover lower (Refer to GROUP 37 - Steering Shaft ).
<<A>>
 >>A<<
 1.
 Key interlock cable connection (engine starting assembly side).


2.
 Key interlock cable



Removal steps for shift lock cable


3.
 Shift lock cable connection (brake pedal side)


4.
 Shift lock cable

REMOVAL SERVICE POINT

<<A>> KEY INTERLOCK CABLE (ENGINE STARTING SWITCH ASSEMBLY SIDE) REMOVAL
Turn the ignition switch to the ACC position and then pull the key interlock cable out from the ignition key cylinder.

INSTALLATION SERVICE POINT

>>A<< KEY INTERLOCK CABLE (ENGINE STARTING SWITCH ASSEMBLY SIDE) INSTALLATION
Turn the ignition switch to the ACC position and then install the key interlock cable to the ignition key cylinder.