DISASSEMBLY AND REASSEMBLY



Disassembly steps


1.
 Stopper plate

>>B<<
 2.
 One-way clutch


3.
 Snap ring


4.
 Output planetary carrier

>>A<<
 5.
 Thrust bearing #3


6.
 Underdrive sun gear

>>A<<
 7.
 Thrust bearing #4


8.
 Snap ring


9.
 Overdrive planetary carrier


10.
 Overdrive annulus gear

REASSEMBLY SERVICE POINTS

>>A<< THRUST BEARING #3/#4 INSTALLATION

caution Make sure the ends of each thrust bearing are oriented correctly.
Install the thrust bearings #3 and #4 in position as shown in the drawing.

>>B<< ONE-WAY CLUTCH INSTALLATION

Insert the one-way clutch into the overdrive annulus gear with the arrow pointing as shown in the drawing.