|
1.Remove the caliper
assembly and suspend it with a wire.
|
|
2.Remove the brake disc from
the front hub.
|
![](../../../img/26/AC102438AA00ENG.png)
|
3.Attach a dial gauge as
shown in the illustration, and then measure the axial play
while moving the hub in the axial
direction. Limit: 0.05 mm 4.If
axial play exceeds the limit, disassemble the front hub
assembly and check the parts. 5.Install the brake
disc, caliper assembly and tighten the caliper assembly
mounting bolts to the specified torque 100 ± 10
N·m.
|