- Front hub and end yoke holder (MB990767)
- Hub bolt remover (MB991618)
| 1.Remove the caliper
assembly and suspend it with wire so that it does not
fall. |
| 2.Remove the brake
disc. |
|
3.Use the following special
tools to remove the hub bolts.
|
 |
4.Install the plain washer
to the new hub bolt, and install the bolt with a
nut. 5.Install the brake disc, caliper assembly and tighten the caliper assembly mounting bolts to the specified torque 100 ± 10 N·m. |