|
1.Remove the caliper
assembly, and suspend the caliper assembly with a wire and
remove the brake disc.
|
![](../../../img/27/AC302112AC00ENG.png)
|
2.Check the bearing’s
axial play. Place a dial gauge against the hub surface; then
move the hub in the axial direction and check whether or not
there is axial play. Limit: 0.05
mm 3.If the play exceeds the limit,
replace the rear hub assembly. 4.After having
checked, install the brake disc, the caliper assembly and
tighten the caliper mounting bolt to the specified
torque. Tightening torque: 60 ± 5
N·m
|