REMOVAL AND INSTALLATION


caution *: Indicates parts which should be initially tightened, and then fully tightened after placing the vehicle horizontally and loading the full weight of the engine on the vehicle body.
Pre-removal Operation
  • Raise the engine and transmission assembly until its weight is not applied to the insulator, and support it securely.
  • Air Cleaner Removal (Refer to GROUP 15, Air Cleaner ).
  • Battery and Battery tray Removal
  • Front Exhaust Pipe Removal (Refer to GROUP 15, Exhaust Pipe and Main Muffler ).
  • Engine Rear Roll Stopper Bracket Removal (Refer to ).

 Post-installation Operation
  • Engine Rear Roll Stopper Bracket Installation (Refer to ).
  • Front Exhaust Pipe Installation (Refer to GROUP 15, Exhaust Pipe and Main Muffler ).
  • Air Cleaner Installation (Refer to GROUP 15, Air Cleaner ).
  • Battery and Battery tray Installation




Removal steps


1.
 Transmission mounting bracket pad <A/T>


2.
 Self-locking nuts


3.
 Transmission mounting insulator

>>A<<
 4.
 Transmission mounting stopper

INSTALLATION SERVICE POINT

>>A<< TRANSMISSION MOUNTING STOPPER INSTALLATION

Install the transmission mounting stopper as shown in the illustration.