|
- Check the bushing for wear
and deterioration.
- Check the lower arm for bend or breakage.
- Check all bolts for condition and
straightness.
|
![](../../../img/33/AC001091AB00ENG.png)
|
1.After shaking the ball
joint stud several times, use special tool preload socket
(MB991006)
to measure the starting torque of the ball
joint. Standard value: 0 -
6.6 N·m 2.If the measured value is
not within the standard value, or if the ball joint is
difficult
to turn or does not turn smoothly, replace the lower arm
assembly.
|
|
1.Check the dust cover for
cracks or damage by pushing it with your finger.
|
|
2.If the dust cover is
cracked or damaged, replace the lower arm
assembly.
note |
Cracks or damage to the dust
cover may cause damage to the ball joint. When
it is damaged
during service work, replace the dust
cover.
|
|