![](../../../img/33/AC500406AC00ENG.png)
|
Replace the bushing as
follows:
|
![](../../../img/33/AC500407AC00ENG.png)
|
1.Use the following special
tools to drive out the bushing.
- MD998911: Bearing installer
- MB990890: Rear suspension bushing base
|
![](../../../img/33/AC500408AC00ENG.png)
|
2.Use the following special
tools to press in the bushing.
- MD991446: Bushing remover and installer
spacer
- MB990890: Rear suspension bushing base
3.Position the bushing, as shown, and then use
the special tools to press in the bushing. 4.Press
the bushing until its outer tube is flush with the lower arm
assembly surface.
|