REMOVAL AND INSTALLATION

		Removal steps
>>B<<	1.	Self-locking nut
	2.	Bolt
	3.	Joint cup (A)
	4.	Stabilizer rubber
	5.	Joint cup (B)
	6.	Collar
>>A<<	7.	Rear suspension stabilizer bar bracket
>>A<<	8.	Rear suspension stabilizer bar bushing
	9.	Rear suspension stabilizer bar

INSTALLATION SERVICE POINT

>>A<< REAR SUSPENSION STABILIZER BAR BUSHING/REAR SUSPENSION STABILIZER BAR BRACKET INSTALLATION

caution

Tighten the front and rear bolts uniformly to prevent them from loosening.

Install the bushing and the bracket so that the stabilizer bar identification mark is located in the position shown in the illustration.

>>B<< SELF-LOCKING NUT INSTALLATION

Install the joint cup (A) and joint cup (B) as shown in the figure, and tighten the self-locking nut so that the protruding length of the stabilizer bar mounting bolt protruding part meets its standard value (A).
Standard value (A): 14 - 16 mm